| Type: | LiFePO4 Battery |
|---|---|
| Cathode Material: | LFP |
| Rechargeable: | Yes |
| Size: | L 837*W455*H181 mm |
| Working Temperature: | -10deg--+50deg |
| IP Degree: | IP54 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier UPV Hybrid energy storage inverter + LFP-M Battery pack is a DC-coupled photovoltaic energy storage system solution for a variety of scenarios, featuring hybrid power supply, reservation of energy supply and high overall system efficiency. It helps customers to build their own solar self-powered systems, reducing their electricity bills while providing them with a flexible and stable power supply environment.
·Self-consumption priority
When solar power is sufficient, it provides power to loads directly, and then charge batteries or sell to the grid. But when thesolar power is insufficient, it will be supplemented by battery or the grid. Inverter charges battery at set time when grid tariffis cheap to secure battery health.
Back up mode
Solar power charges batteries first, then power up the loads connect-ed. If there is still excess power. it feeds back to the grid. If solar power is insufficient, it will be supplementedby the grid. Battery power only works when the grid fails.
|
UPV Series Hybrid Energy Storage Inverter
|
||||
|
Model
|
UPV 5048E
|
|||
|
Battery
|
||||
|
Battery Type
|
Lead~acid or Lithium~ion
|
|||
|
BatteryVoltage Range
|
40~60V
|
|||
|
Max. Charge/Discharge Current
|
100A
|
|||
|
Charging Curve
|
3 Stages
|
|||
|
Charging Voltage
|
Depends on battery type
|
|||
|
Input DC(PV Side)
|
||||
|
Recommended Max. PV Power
|
3kW
|
|||
|
Rated Voltage Range
|
60~200V
|
|||
|
Max. Input Voltage
|
200V
|
|||
|
Start Up Voltage
|
75V
|
|||
|
MPPT Voltage Range
|
75~170V
|
|||
|
Max. Input Current
|
60A
|
|||
|
No.Of MPPT Trackers No.Of Strings Per MPPT Tracker
|
1
|
|||
|
PV Module Efficiency
|
≥99.6%
|
|||
|
Output AC (Back Up)
|
||||
|
Rated Output Power
|
5000W
|
|||
|
Max. AC Output Power
|
5500W
|
|||
|
Back Up Switch Time
|
<8ms
|
|||
|
Rated output voltage
|
230V (Single Phase)
|
|||
|
Rated frequency
|
50Hz
|
|||
|
Rated output current
|
22.7A
|
|||
|
Input Voltage Waveform
|
Pure Sine Wave
|
|||
|
THDv (@linear load)
|
2%
|
|||
|
No load loss
|
<50W
|
|||
|
LFP-M 10.75kWh LiFePO4 Battery Pack
|
||||
|
Specification
|
||||
|
Model
|
LFP-M48210H
|
|||
|
Rated Voltage
|
51.2V
|
|||
|
Rated Capacity
|
210Ah
|
|||
|
Rated Energy
|
10.75KWH
|
|||
|
Cell Configuration
|
16S2P
|
|||
|
Battery Cell
|
3.2V105AH 32PCS(EVE LF105)
|
|||
|
Life cycles(70%EOL,25ºC)
|
6000 Cycles
|
|||
|
Standard Charge
|
||||
|
Operation temperature range ©charging
|
0~60ºC
|
|||
|
Rated charge voltage
|
56V
|
|||
|
Max charge voltage
|
56.8±0.4V
|
|||
|
Overcharge protection
|
58.4±0.4V
|
|||
|
Allowed MAX charge current
|
205A
|
|||
|
Peak charge current
|
210A
|
|||
|
Rated charge current
|
200A
|
|||
|
Recommend charge current
|
<200A
|
|||
|
Standard Discharge
|
||||
|
Operation temperature range ©discharging
|
-35~60°C
|
|||
|
Output Voltage Range
|
43.2~56.8Vdc
|
|||
|
Recommend Working Range
|
46.4~56Vdc
|
|||
|
Discharge Cut-off voltage
|
43.2V
|
|||
|
Allowed MAX discharge current
|
205A
|
|||
|
Peak discharge current
|
210A
|
|||
|
Rated discharge current
|
200A
|
|||
|
Recommend discharge current
|
<200A
|
|||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}