| Customization: | Available |
|---|---|
| Weight: | 47kg |
| Warranty: | 3yeras |
|
Still deciding? Get samples of US$ 1250/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features for EVERBEST Lithium battery
* Due to the demand for energy saving strategies, EVERBEST delivers a full range of battery power systems with multiple nominal voltages (12V/24V/48V etc.). It is smaller in size and lighter in weight, but it has longer cycle life, temperature durability is stronger, and energy storage is more efficient. With the accurate and reliable battery management system (BMS), our lithium battery power system is a better solution for achieving highest efficiency and reliability. After years of practice, we have the most extensive experience in backup power supply in the industry, and we will continue to provide the best battery products.
* EVERBEST high-quality cell brings higher conversion efficiency of the energy, the common performance of the B Level batteries which are most common in the market will only have 75% percentage capacity left, however, we will remain 99%.
Advantages for EVERBEST LiFePO4 Battery
* Energy density is high. The volume and weight of lithium battery is 1/3 to 1/4 of the traditional lead acid battery with the same capacity. Energy conversion rate is 15% higher than that of a traditional lead acid battery, the advantage of energy saving is obvious. Self-discharge rate < 2% per month.
* Broad temperature adaptability. Products perform well at a temperature of -20°C to 60°C, without air conditioning system.
* Cycle durability for a single cell is 3500 cycles, which is 3 to 4 times more than the cycle durability of a traditional lead acid battery.
* Higher discharge rate, faster charging and dischargingWhen there is a need for backup power supply for a period of 10 hours or less, we could reduce up to 50% of the capacity configuration, comparing to lead acid battery.
* High security. Our lithium battery is safe, electrochemical materials are stable, no fire or explosion under extreme conditions such as high temperature, short circuit, drop impact, piercing, etc
* Optional LCD digital display. The optional LCD digital display can be installed at any location and displays battery voltage, capacity, current information, etc.
| NO | Item | Description | |||
| Normal specfication | |||||
| 1 | Rated Voltage | 51.2v | |||
| 2 | Rated Capacity | 200AH | |||
| 3 | Rated Energy | 10.24KWH | |||
| 4 | battery configuration | 16S2P | |||
| 5 | battery cell | 3.2V 100AH 32PCS | |||
| Standard Charge | |||||
| 1 | Battery operation temperature range @charging | 0~45°C | |||
| 2 | Max charge voltage | 56.8±0.4v | |||
| 3 | Rated charge voltage | 56±0.4v | |||
| 4 | Allowed MAX charge current | 120A | |||
| 5 | Recommend charge current | 100A | |||
| 6 | Over charge Protection Release | Restart the battery | |||
| Standard discharge | |||||
| 1 | Battery operation temperature range @charging | -20~60°C | |||
| 2 | Output Voltage Range | 40~56v | |||
| 3 | Allowed MAX discharge current | 200A | |||
| 4 | Peak discharge current | 240A 5S | |||
| 5 | Recommend discharge current | 200A | |||
| 6 | Discharge Cut-off Voltage | 40V | |||
| 7 | Over doscharge Protection Release | charging or release load and restart | |||
| Operation and Indicator | |||||
| 1 | Power Switch |
ON: all function start OFF: all function shut down |
|||
| 2 | Run LED (green) |
lighting: system working normal Flash: suystem warning |
|||
| 3 | Alarm LED (red) |
Lighting: system fault Flash: suystem warning |
|||
| 4 | SOC LED (4 pcs green) |
Charging: SOC<25% LED1. LED2. LED 3. LED flah 4 in turn 25%<SOC<50% LED1 lighting, LED2 . LED3. LED4 flash in turn 50%<SOC<75% LED1. LED2 lighting,LED3. LED4 flash in turn 75%<SOC<95% LED1 LED2 LED3 lighting, LED4 flash
Discharging: SOC>75% LED1.LED2. LED3. LED4 lighting 50%<SOC<75% LED1 LED2 LED3 lighting, LED4 off 25%<SOC<50% LED1 LED2 lighting, LED3. LED4 off 10%<SOC<25% LED1 lighting,LED2. LED3. LED4 off SOC<10% LED flash, LED2. LED3.LED4 off |
|||
| communication | |||||
| 1 | RS485 | for LCD remote control (option) | |||
| 2 | CAN | PC control and monitor( one communication CAN card support ten packs parallel | |||
| Mechanical Characteristics | |||||
| 1 | dimension | L*W*H (unit)=850*550*190mm | |||
| 2 | weight |
N.W 105kg G.W 115KG |
|||
| Storage and transportation requirements | |||||
| 1 | storage temaperature | less than 1 month | -20~35°C | ||
| less than 6 month | -10~30°C | ||||
| 2 | storage humidity | 45~75% RH | |||
| 3 | SOC | storage | 60~75% SOC | ||
| transport | 45~55% SOC | ||||
we are manufacture of battery for more than 10years. We have 3 manufacture base in Shenzhen, Guangdong, Shaoguan. There are 2 automatic production lines in our Shenzhen Base. Our price is very competitve in the market on the condition of comparing to the same quality products.
Our technical manager is in lithium battery industry for more than 15years, and we have lots of experience for OEM & ODM.
1) OEM Service :
We can customize battery system and provide OEM branding designs for your need.
2) Pre-Sales Service:
* Salesmen with 3 months of product training.
* Your technique questions will be forwarded to the engineer for solution.
* Sample order support .
* Visit our factory.
3) After-sales Service :
* Warranty: 5 years warranty
* After-sales team keep track of usage and provide timely feedback
* Engineers maintenance on the damaged part for free.
4) Batter Service :
We always offer what our clients need. Reply client's questions in time. Supply best projects solution for clients. We ship out the products on time.
5) Rich Experience :
We have more than 5 years experience in manufacturing battery pack and assemble battery cells as per customer's design and requirement.
){kind=link}